Try to find the solution
BONDERITE C-NE 3300 - 23kg (płynny środek do usuwania chłodziw oraz innych olei roboczych, zawierający inhibitory korozj
No.
IDH.2587877
Product description:
BONDERITE C-NE 3300 is an aqueous neutral cleaner. It is composed of organic corrosion protection components, cleaning active agents and inhibitors. Change of colour is caused by raw material and has no Impact on performance.
Application Areas:
Cleaning after cutting, stamping or pressing and simultaneously passivating of steel, cast iron and aluminium work pieces, e.g in the metal working industry as well as in the manufacture of engines and transmissions. BONDERITE C-NE 3300 is used in spray processes, suitable for high pressure operations. It has very good demulsifying properties. Further informations can be obtain from local technical department: biuro@woronko-kleje.pl
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
Add the required amount carefully to the circulation system.Concentration on steel and cast iron : 10 to 30 g/L Concentration on Aluminium : 10 to 30 g/L
Operating Data: Temperature : 30 to 80°C Duration of treatment : 0.5 to 3 min
Storage:
Recommended storage temperature : 0 to 40°C Shelf-life, months : 24 months Frost-Sensitive : yes
Parameters: Technology : industrial cleaner Product type : neutral cleaner Application : parts cleaning Concentration : 10 to 30 g/l Operating Temperature : 30 to 80 °C spray process Appearance clear, bright yellowish liquid Density at 20°C, DIN 51757 : ~1.03 g/cm³ pH-value (1% solution) : ~9.3
Full technical information can be found in technical data sheet
BONDERITE C-NE 3300 is an aqueous neutral cleaner. It is composed of organic corrosion protection components, cleaning active agents and inhibitors. Change of colour is caused by raw material and has no Impact on performance.
Application Areas:
Cleaning after cutting, stamping or pressing and simultaneously passivating of steel, cast iron and aluminium work pieces, e.g in the metal working industry as well as in the manufacture of engines and transmissions. BONDERITE C-NE 3300 is used in spray processes, suitable for high pressure operations. It has very good demulsifying properties. Further informations can be obtain from local technical department: biuro@woronko-kleje.pl
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
Add the required amount carefully to the circulation system.
Operating Data:
Storage:
Parameters:
Full technical information can be found in technical data sheet