Try to find the solution
BONDERITE C-MC 400 - 23kg (środek do usuwania graffiti)
No.
IDH.2512109
Associated products:
BONDERITE C-MC 400 - 23kg (środek do usuwania graffiti)
Associated products:
Product description:
LOCTITE® 7862 efficiently removes almost all types of graffiti from non absorbing materials such as glass, ceramics or painted surfaces (e.g. external bodies of railways carriages or buses). Due to its unique formulation LOCTITE® 7862™ can be used on vertical surfaces to dissolve graffiti. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Shake LOCTITE® 7862 before use and apply manually (brush or sponge) or by using an airless spraying system.
2. Let the product react for 5 to 10 minutes, then remove the disolved paint from the surface.
3. Rinse with Loctite® 7012 to clean the surface completely.
4. Repeat application if necessary.
Storage:
Store product in the unopened container in a dry location.Storage information may be indicated on the product container labeling. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C orgreater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Technology: Solvent based Chemical Type: Solvent Appearance: Thickend yellow liquid Viscosity: Low Cure: Not applicable Application: Graffiti and marking remover
Full technical information can be found in technical data sheet.
LOCTITE® 7862 efficiently removes almost all types of graffiti from non absorbing materials such as glass, ceramics or painted surfaces (e.g. external bodies of railways carriages or buses). Due to its unique formulation LOCTITE® 7862™ can be used on vertical surfaces to dissolve graffiti. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Shake LOCTITE® 7862 before use and apply manually (brush or sponge) or by using an airless spraying system.
2. Let the product react for 5 to 10 minutes, then remove the disolved paint from the surface.
3. Rinse with Loctite® 7012 to clean the surface completely.
4. Repeat application if necessary.
Storage:
Store product in the unopened container in a dry location.Storage information may be indicated on the product container labeling. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C orgreater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in technical data sheet.