Try to find the solution
LOCTITE AA 3038 - 50ml (acrylic adhesive, for polyolefins, up to 100 °C)
No.
IDH.1420880
Price
Associated products:
- LOCTITE AA 3038 - 490ml (acrylic adhesive, for polyolefins, up to 100 °C) (IDH.1070182)
- Mixing nozzle Stat Mixer CB ID6.5 EL20 4/10, Type No. 1034575 (IDH.1034575A)
- LOCTITE SF 7063 - 400ml (degreasing agent for plastics and metals) spray (IDH.2385316)
- LOCTITE 8901070 (dedicated manual applicator for LOCTITE AA 3038 50ml, mixing ratio of components A&B 10:1) (IDH.1034026)
Files to download:
- Karta Techniczna - LOCTITE AA 3038
- Technical Data Sheet - LOCTITE AA 3038
- Technisches Datenblatt - LOCTITE AA 3038
- Karta Charakterystyki (Składnik A) - LOCTITE AA 3038
- Karta Charakterystyki (Składnik B) - LOCTITE AA 3038
- Safety Data Sheet (Component A) - LOCTITE AA 3038
- Safety Data Sheet (Component B) - LOCTITE AA 3038
- Sicherheitsdatenblatt (Komponent A) - LOCTITE AA 3038
- Sicherheitsdatenblatt (Komponent B) - LOCTITE AA 3038
LOCTITE AA 3038 - 50ml (acrylic adhesive, for polyolefins, up to 100 °C)
Associated products:
- LOCTITE AA 3038 - 490ml (acrylic adhesive, for polyolefins, up to 100 °C) (IDH.1070182)
- Mixing nozzle Stat Mixer CB ID6.5 EL20 4/10, Type No. 1034575 (IDH.1034575A)
- LOCTITE SF 7063 - 400ml (degreasing agent for plastics and metals) spray (IDH.2385316)
- LOCTITE 8901070 (dedicated manual applicator for LOCTITE AA 3038 50ml, mixing ratio of components A&B 10:1) (IDH.1034026)
Product description:
LOCTITE AA 3038 is designed primarily to bond e-coated metals (ECS) to glass fibre filled polypropylenes (PPGF) but can also be used on other low energy substrates such as LDPE and HDPE. The product is designed to work without surface pre-treatment. The product contains 0.25 mm fillers for bondline thickness control. The thixotropic nature of LOCTITE AA 3038 reduces the migration of liquid product after application to the substrate. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. For best performance bond surfaces should be clean and free from grease. Use LOCTITE SF 7063.
2. For more detailed information, please contact your local Technical Service Center or Customer Service Representative.
Storage:
Store product in the unopened container in a dry location. Material removed from containers may be contaminated during use.
Do not return liquid to original container. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those recommended.
Parameters:
Shear strength, ISO 4587 (cured for 72 hours 22 °C) :
Full technical information can be found in the technical data sheet.
LOCTITE AA 3038 is designed primarily to bond e-coated metals (ECS) to glass fibre filled polypropylenes (PPGF) but can also be used on other low energy substrates such as LDPE and HDPE. The product is designed to work without surface pre-treatment. The product contains 0.25 mm fillers for bondline thickness control. The thixotropic nature of LOCTITE AA 3038 reduces the migration of liquid product after application to the substrate. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. For best performance bond surfaces should be clean and free from grease. Use LOCTITE SF 7063.
2. For more detailed information, please contact your local Technical Service Center or Customer Service Representative.
Storage:
Store product in the unopened container in a dry location. Material removed from containers may be contaminated during use.
Do not return liquid to original container. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those recommended.
Parameters:
Shear strength, ISO 4587 (cured for 72 hours 22 °C) :
- PPGF to ECS, N/mm² : ≥8
- PPGF to Polycarbonate, N/mm² : 5,5
- Aluminum (etched), N/mm² : 7,9
- PPGF, N/mm² : 9,8
- Polyamide (Nylon), N/mm² : 2,9
- Poly(butylene terephthalate) (PBT), N/mm² : 13,6
- PPGF to ECS, N/mm² : 8,4
- PPGF to ECS, N/mm² : 10,5
Full technical information can be found in the technical data sheet.