Try to find the solution
LOCTITE SF 7852 - 70szt (cleaning cloths)
No.
IDH.1898064
Product description:
LOCTITE 7852 is a pre-moisturized wipe ideal for use as a Hands & Parts Cleaner. It cleans hands, parts and surfaces with a mixture of organic substances and leaves a fresh orange scent after application. LOCTITE 7852 cleans without water and can remove most greases, grimes, inks, paints and traces of adhesives. The wipe incorporates a double-layer technology consisting of an abrasive side to clean up persistent dirt and/or rough surfaces and a smooth/absorbent side to clean fresh spots and/or smooth/fragile surfaces. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. Open the top closure and pull out one wipe.
2. Use the abrasive side to clean spots with persistent dirt and/or rough surfaces. Use the smooth/absorbent side to clean fresh spots and/or smooth/fragile surfaces.
3. Close top closure well to avoid drying of the remaining wipes.
Storage:
Store product in the unopened container in a dry location. Material removed from containers may be contaminated during use. Do not return material to original container. Storage information may be indicated on the product container labeling. Optimal Storage: 3 °C to 35 °C. Storage below 3 °C or greater than 35 °C can adversely affect product properties. Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those recommended.
Parameters:
Dimensions per wipe, mm : 300 x 200 ± 5 Weight per wipe (dry), g/m² : 55 ± 10% Number of wipes per bucket : 70 ± 1 Amount of liquid per bucket, g : 600 ± 5% pH of liquid : 5 to 7
Full technical data can be found in the technical data sheet
LOCTITE 7852 is a pre-moisturized wipe ideal for use as a Hands & Parts Cleaner. It cleans hands, parts and surfaces with a mixture of organic substances and leaves a fresh orange scent after application. LOCTITE 7852 cleans without water and can remove most greases, grimes, inks, paints and traces of adhesives. The wipe incorporates a double-layer technology consisting of an abrasive side to clean up persistent dirt and/or rough surfaces and a smooth/absorbent side to clean fresh spots and/or smooth/fragile surfaces. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. Open the top closure and pull out one wipe.
2. Use the abrasive side to clean spots with persistent dirt and/or rough surfaces. Use the smooth/absorbent side to clean fresh spots and/or smooth/fragile surfaces.
3. Close top closure well to avoid drying of the remaining wipes.
Storage:
Store product in the unopened container in a dry location. Material removed from containers may be contaminated during use. Do not return material to original container. Storage information may be indicated on the product container labeling. Optimal Storage: 3 °C to 35 °C. Storage below 3 °C or greater than 35 °C can adversely affect product properties. Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those recommended.
Parameters:
Full technical data can be found in the technical data sheet