Try to find the solution
BONDERITE C-AK 1563 - 35kg (zasadowy zmywacz przemysłowy na bazie poliakrylanu i fosforanu do stali, ocynku i aluminium
No.
IDH.604626
Product description:
BONDERITE C-AK 1563 is a liquid alkaline cleaner based on polyacrylate and phosphate for steel, zinc plated steel and aluminium.
Application Areas:
BONDERITE C-AK 1563 is used in spray- and spray/immersion processes. It must be combined with a suitable cleaning booster.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
Depending on the substrate, make-up will be done with BONDERITE C-AK 1563 or BONDERITE C-AK 1563 A . Fill the tank with warm water, start pumping and add for a volume of 1,000 L:
Zinc plated steel and aluminum:
BONDERITE C-AK 1563 A 7.7 to 23.1 L= 10 to 30 kg Cleaning booster depends on requirements
Steel:
BONDERITE C-AK 1563 7.2 to 21.6 L = 10 to 30kg Cleaning booster depends on requirements
Operating Data:
Adjusting the following parameters could be necessary depending on the line conditions. Total alkalinity:
- BONDERITE C-AK 1563 A , mL 3.8 to 11.4
- BONDERITE C-AK 1563, mL 4.8 to 14.4
Free alkalinity:
- BONDERITE C-AK 1563 A , mL 1.2 to 3.6
- BONDERITE C-AK 1563, mL 2.0 to 6.0
- Temperature, °C 50 to 80
- Duration of treatment, min 1 to 5
- Spray pressure, bar 0.8 to 2.0
Bath Control:
BONDERITE C-AK 1563 solution is controlled by the following analysis:
- Titration of total alkalinity:
- Feed, mL 10
- Titrant: 0.1 N hydrochloric or 0.1 N sulfuric acid
- End point, pH 3.6
- Indicator: bromecresolgreen (0.1 % alcoholic solution)
Storage:
Recommended Storage Temperature, °C : 0 to 50 Shelf-life, months (in unopened original packaging) : 36
Parameters:
Density at 20°C, g/cm³ : ~1.39 pH-value (1% in DI water 20°C) : ~11.6
Full technical information about the product is in the technical data sheet.
BONDERITE C-AK 1563 is a liquid alkaline cleaner based on polyacrylate and phosphate for steel, zinc plated steel and aluminium.
Application Areas:
BONDERITE C-AK 1563 is used in spray- and spray/immersion processes. It must be combined with a suitable cleaning booster.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
Depending on the substrate, make-up will be done with BONDERITE C-AK 1563 or BONDERITE C-AK 1563 A . Fill the tank with warm water, start pumping and add for a volume of 1,000 L:
BONDERITE C-AK 1563 A 7.7 to 23.1 L= 10 to 30 kg Cleaning booster depends on requirements
BONDERITE C-AK 1563 7.2 to 21.6 L = 10 to 30kg Cleaning booster depends on requirements
Operating Data:
Adjusting the following parameters could be necessary depending on the line conditions.
- BONDERITE C-AK 1563 A , mL 3.8 to 11.4
- BONDERITE C-AK 1563, mL 4.8 to 14.4
- BONDERITE C-AK 1563 A , mL 1.2 to 3.6
- BONDERITE C-AK 1563, mL 2.0 to 6.0
- Temperature, °C 50 to 80
- Duration of treatment, min 1 to 5
- Spray pressure, bar 0.8 to 2.0
Bath Control:
BONDERITE C-AK 1563 solution is controlled by the following analysis:
- Titration of total alkalinity:
- Feed, mL 10
- Titrant: 0.1 N hydrochloric or 0.1 N sulfuric acid
- End point, pH 3.6
- Indicator: bromecresolgreen (0.1 % alcoholic solution)
Storage:
Parameters:
Full technical information about the product is in the technical data sheet.