Try to find the solution
BONDERITE C-NE 5225 - 225kg (wodny, przewodzący obojętny środek czyszczący / aqueous, conductive neutral cleaner) : (bec
No.
IDH.489464
Product description:
BONDERITE C-NE 5225 is an aqueous, conductive neutral cleaner. The product contains organic and inorganic corrosion protection components, phosphates, borates, nonionic and cationic surfactants. Even despite high infiltration of coolants, the foarming behaviour of the product is unlikely to change. Change of colour is caused by raw material and has no impact on performance.
Application Areas:
Cleaning after cutting, stamping or pressing, simultaneously passivating steel, cast iron and silumin work pieces. BONDERITE C-NE 5225 is used in spray processes.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
Add the required amount carefully to the circulation system.Concentration on steel and nonferrous metals 5 to 20g/L Concentration on cast iron 15 to 30g/L
Depending on water hardness the minimum concentration should be 1 g/L per "Degree German Hardness" (especially Ca hardness).
Operating Data:
Temperature 20 to 80 °C Duration of treatment 0.5 to 3 min
Longer duration of treatment may cause discolouration on nonferrous metals.
Storage:
Recommended Storage Temperature : -5 to 40°C Shelf-life, months : 24 months
Parameters:
Appearance : clear, light yellowish liquid Density at 20°C, DIN 51757 : ~1.13 g/cm³ pH-value (1% solution ): ~9.2 Conductivity at 20°C, 20 g/L, in DI water DIN 27888 : 2.8 mS/cm
Full technical information can be found in the technical data sheet.
BONDERITE C-NE 5225 is an aqueous, conductive neutral cleaner. The product contains organic and inorganic corrosion protection components, phosphates, borates, nonionic and cationic surfactants. Even despite high infiltration of coolants, the foarming behaviour of the product is unlikely to change. Change of colour is caused by raw material and has no impact on performance.
Application Areas:
Cleaning after cutting, stamping or pressing, simultaneously passivating steel, cast iron and silumin work pieces. BONDERITE C-NE 5225 is used in spray processes.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath Make-up:
Add the required amount carefully to the circulation system.
Depending on water hardness the minimum concentration should be 1 g/L per "Degree German Hardness" (especially Ca hardness).
Operating Data:
Longer duration of treatment may cause discolouration on nonferrous metals.
Storage:
Parameters:
Full technical information can be found in the technical data sheet.