Try to find the solution
BONDERITE C-SO 101 - 23kg (szybkoschnąca mieszanka rozpuszczalników do czyszczenia)
No.
IDH.29134
BONDERITE C-SO 101 - 23kg (szybkoschnąca mieszanka rozpuszczalników do czyszczenia)
Product description:
BONDERITE C-SO 101 is a quick drying solvent mixture without emulsifier and bad smell.
Application Areas
● Cleaning of stationary machines and parts, soiled with oil, in repair shops and production plants.
● Removal of protective coatings at motor cars.
● Removal of tar spots at motor cars.
Composition
Solvent mixture without bad smell, dries without leaving residues, free of ingredients (CKW, FCKW etc.) that have to be labelled. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. The parts to be cleaned can be treated manually (with soaked sponge) or in a dip bath. BONDERITE C-SO 101 evaporates quickly after the cleaning.
2. BONDERITE C-SO 101 can be applied undiluted with the help of a spray equipment or manually with a sponge. During the application time the treated areas should be treated with a rag or sponge and afterwards must be sprayed off with water. BONDERITE C-SO 101 can be applied with a water jet.
3. BONDERITE C-SO 101 can be applied with the help of a spray equipment or manually. After a short application time it should be washed off with additional BONDERITE C-SO 101.
Storage:
Recommended Storage Temperature, °C : 0 to 40 Shelf-life, months (in unopened original packaging) : 24
Parameters:
Appearance : clear, colorless, homogeneous liquid Density, g/mL : 0.77 Viscosity : 1.8 cSt / 25°C Evaporation number (DIN 53170) : ~88 (for the product as it is) Flash Point : ~57 °C (does not sink) Solubility with water : only mixable by force (e. g. with injector) Melting Point, °C : -30 Boiling Point, °C : 180
Full technical information can be found in the technical data sheet.
BONDERITE C-SO 101 is a quick drying solvent mixture without emulsifier and bad smell.
Application Areas
● Cleaning of stationary machines and parts, soiled with oil, in repair shops and production plants.
● Removal of protective coatings at motor cars.
● Removal of tar spots at motor cars.
Composition
Solvent mixture without bad smell, dries without leaving residues, free of ingredients (CKW, FCKW etc.) that have to be labelled. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. The parts to be cleaned can be treated manually (with soaked sponge) or in a dip bath. BONDERITE C-SO 101 evaporates quickly after the cleaning.
2. BONDERITE C-SO 101 can be applied undiluted with the help of a spray equipment or manually with a sponge. During the application time the treated areas should be treated with a rag or sponge and afterwards must be sprayed off with water. BONDERITE C-SO 101 can be applied with a water jet.
3. BONDERITE C-SO 101 can be applied with the help of a spray equipment or manually. After a short application time it should be washed off with additional BONDERITE C-SO 101.
Storage:
Parameters:
Full technical information can be found in the technical data sheet.