Try to find the solution
LOCTITE 7862 CE1 - 20l (cleaner for removing graffiti and inscriptions)
No.
IDH.1434656
Product description:
LOCTITE 7862 efficiently removes almost all types of graffiti from non absorbing materials such as glass, ceramics or painted surfaces (e.g. external bodies of railways carriages or buses). Due to its unique formulation LOCTITE 7862 can be used on vertical surfaces to dissolve graffiti. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Shake LOCTITE 7862 before use and apply manually (brush or sponge) or by using an airless spraying system.
2. Let the product react for 5 to 10 minutes, then remove the disolved paint from the surface.
3. Rinse with LOCTITE 7012 to clean the surface completely.
4. Repeat application if necessary.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Chemical type : solvent Appearance : thickend yellow liquid Density at 20 °C : 1,0 Viscosity, mPa·s (cP) : 10 do 30 pH for 10 g/l : 3,7
Full technical information can be found in the technical data sheet
LOCTITE 7862 efficiently removes almost all types of graffiti from non absorbing materials such as glass, ceramics or painted surfaces (e.g. external bodies of railways carriages or buses). Due to its unique formulation LOCTITE 7862 can be used on vertical surfaces to dissolve graffiti. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Shake LOCTITE 7862 before use and apply manually (brush or sponge) or by using an airless spraying system.
2. Let the product react for 5 to 10 minutes, then remove the disolved paint from the surface.
3. Rinse with LOCTITE 7012 to clean the surface completely.
4. Repeat application if necessary.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the technical data sheet