Try to find the solution
BONDERITE C-AD 1270 - 23kg
No.
IDH.2587357
Product description:
BONDERITE C-AD 1270 is a liquid cleaning booster based on nonionic surfactants.
Application Areas
BONDERITE C-AD 1270 is used in spray- and spray/immersion processes. It must be combined with a suitable cleaner. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath make-up:
Fill the tank with warm water, start pumping and add for a volume of 1,000 L: BONDERITE C-AD 1270 0.1 to 2.0 kg
Storage:
Recommended Storage Temperature : 0 to 40°C Shelf-life, months (in unopened original packaging) : 36 Frost-Sensitive : yes
Parameters: Technology : Industrial Cleaner Product Type : Cleaning booster Application : Metal Pre-Treatment Density : ~1.0 g/cm³
Full technical information can be found in the technical data sheet.
BONDERITE C-AD 1270 is a liquid cleaning booster based on nonionic surfactants.
Application Areas
BONDERITE C-AD 1270 is used in spray- and spray/immersion processes. It must be combined with a suitable cleaner. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support.
Bath make-up:
Fill the tank with warm water, start pumping and add for a volume of 1,000 L: BONDERITE C-AD 1270 0.1 to 2.0 kg
Storage:
Parameters:
Full technical information can be found in the technical data sheet.