Try to find the solution
BONDERITE M-CR 1200 AERO - 10kg (powłoka konwersyjna do aluminium i jego stopów / conversion coating for aluminium and i
No.
IDH.365580
Product description:
A rapid process which forms a protective golden coloured conversion coating on aluminium and its alloys.
Application Areas:
BONDERITE M-CR 1200 AERO is a powdered chemical used to produce a protective coating on aluminum which ranges in colour from light iridescent golden to tan. The process is operated at room temperature. The coating produced minimizes corrosion and provides an improved bond for paint. BONDERITE M-CR 1200 AERO coating chemical, being listed on the Qualified Product List QPL for MIL-DTL-81706, is an approved material to be used by Method C (immersion processing) to produce Class 1A and 3 coatings, bare or unpainted, in accordance with Military Specification MIL-C-5541 B.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support. Use instructions
Solution Make-up:
For each 1,000 L of bath, add to the water with stirring or circulating by the pump add 7.5 to 15 kg BONDERITE M-CR 1200 AERO.
Points Cr(VI) : 6.7 to 13.5 pH : 1.8 to 2.1 Temperature, °C : 21 to 38 Time, min. : 1 to 5 Class 3 - Time, min. : 0.25 to 3.0
Storage:
Temperature, °C : -10 to 40 Shelf-life (in unopened original packaging), months : 24
Parameters:
Appearance : brown powder pH-value (of a solution at g/l) : 1.2 to 1.8
Full technical information about the product is in the technical data sheet.
A rapid process which forms a protective golden coloured conversion coating on aluminium and its alloys.
Application Areas:
BONDERITE M-CR 1200 AERO is a powdered chemical used to produce a protective coating on aluminum which ranges in colour from light iridescent golden to tan. The process is operated at room temperature. The coating produced minimizes corrosion and provides an improved bond for paint. BONDERITE M-CR 1200 AERO coating chemical, being listed on the Qualified Product List QPL for MIL-DTL-81706, is an approved material to be used by Method C (immersion processing) to produce Class 1A and 3 coatings, bare or unpainted, in accordance with Military Specification MIL-C-5541 B.
Directions for use:
Preliminary Statement:
Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructions and contact Henkel for analytical support. Use instructions
Solution Make-up:
For each 1,000 L of bath, add to the water with stirring or circulating by the pump add 7.5 to 15 kg BONDERITE M-CR 1200 AERO.
Storage:
Parameters:
Full technical information about the product is in the technical data sheet.