Try to find the solution
BONDERITE M-FE LF-3820 - 23kg (płynny środek do czyszczenia i osadzania powłok na stali (galwanizowanej) oraz stopach Al
No.
IDH.2486423
BONDERITE M-FE LF-3820 - 23kg (płynny środek do czyszczenia i osadzania powłok na stali (galwanizowanej) oraz stopach Al
Product description:
BONDERITE M-FE LF-3820 is a liquid double action chemical process for simultaneously cleaning and iron phosphating steel, galvanized steel and aluminium alloys. BONDERITE M-FE LF-3820 forms on the treated surface an amorphous phosphatic coating, mainly composed by iron phosphates, which provides good adhesion for liquid, powder or electrophoretic paints. Subsequent partial continuous renewal rinse and possibly a final rinse with demineralized water is suggested. A suitable final passivation improves results. Further information about the product: biuro@woronko-kleje.pl
Application Areas:
Pre-painting treatment of spare parts in automotive, appliances, metal furniture industries and, in general, on all plate pieces which are not much exposed to corrosive agent aggression (humidity, atmospheric conditions, etc.)
Directions for use:
Bath make-up:
Fill the tank with tap water to 3/4 of the operating volume. Start recirculating pumps and heat up to the working temperature. Add 10 to 20 kg BONDERITE M-FE LF-3820 for each 1,000 lt bath volume and, if necessary, up to 20 kg BONDERITE M-AD 565 for each 100 kg BONDERITE M-FE LF-3820 as per our Technical Service instructions. Fill up the tank to the final level, heat to operating temperature and let recirculate for 15-20’. Make the controls.
Storage:
Recommended Storage Temperature : 0 to 40°C Shelf-life, months : 36
Parameters: Appearance : clear, yellowish liquid Density at 20°C (DIN 51757) : ~1.21 pH-value (100%) : ~2.5 Concentration : 10 to 20 g/L Temperature : 30 to 70°C
Full technical information can be found in technical data sheet
BONDERITE M-FE LF-3820 is a liquid double action chemical process for simultaneously cleaning and iron phosphating steel, galvanized steel and aluminium alloys. BONDERITE M-FE LF-3820 forms on the treated surface an amorphous phosphatic coating, mainly composed by iron phosphates, which provides good adhesion for liquid, powder or electrophoretic paints. Subsequent partial continuous renewal rinse and possibly a final rinse with demineralized water is suggested. A suitable final passivation improves results. Further information about the product: biuro@woronko-kleje.pl
Application Areas:
Pre-painting treatment of spare parts in automotive, appliances, metal furniture industries and, in general, on all plate pieces which are not much exposed to corrosive agent aggression (humidity, atmospheric conditions, etc.)
Directions for use:
Bath make-up:
Fill the tank with tap water to 3/4 of the operating volume. Start recirculating pumps and heat up to the working temperature. Add 10 to 20 kg BONDERITE M-FE LF-3820 for each 1,000 lt bath volume and, if necessary, up to 20 kg BONDERITE M-AD 565 for each 100 kg BONDERITE M-FE LF-3820 as per our Technical Service instructions. Fill up the tank to the final level, heat to operating temperature and let recirculate for 15-20’. Make the controls.
Storage:
Parameters:
Full technical information can be found in technical data sheet
