The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

BONDERITE S-ST 6776 LO AERO - 23kg (produkt do obróbki wstępnej metalu, usuwanie farby)

brak obrazka

Product description:
BONDERITE S-ST 6776 LO AERO is a low odor, thixotropic paint remover developed for effective stripping of such resistant finishes as epoxies, epoxy primers, polyurethanes, and similar catalyzed paints. BONDERITE S-ST 6776 LO AERO paint remover offers a significant advance in work place safety. It does not contain methylene chloride, chlorinated solvents, phenols, chromates, ammonia or amines. BONDERITE S-ST 6776 LO AERO can be used on aluminum, mild steel, cast iron, and titanium when used as directed.BONDERITE S-ST 6776 LO AERO is not recommended for use on high strength steel or magnesium. BONDERITE S-ST 6776 LO AERO meets the "Effect on Metals" requirements of MIL-R-81903A. Further information about the product: biuro@woronko-kleje.pl

Application Areas:
BONDERITE S-ST 6776 LO AERO offers these features:
1. Low odor,
2. Significantly lower waste disposal costs,
3. Can be easily treated on site (see MSDS),
4. Amount of stripper used less than conventional methylene chloride strippers,
5. No flash point to boil (Pensky-Martens),
6. Used as received, No mixing or dilution required,
7. Excellent cling to vertical and overhead surfaces
8. Positive pressure air respirators are not required

Directions for use:
Applications:
Apply a uniform coating to surface being stripped by means of non-atomizing spray. Allow sufficient time for stripper to work. Performance improves as temperature increases. Agitation with a stiff bristle brush will aid in removal of the finish. Repeat if necessary.

Removal:
Squeegee off bulk of loosened paint and BONDERITE S-ST 6776 LO AERO , followed by high pressure water rinse.

Storage:
Temperature, °C : 0 to 40
Shelf-life (in unopened original packaging), months : 12

Parameters:
  • Appearance : viscous green liquid
  • Viscosity (Brookfield 20° C, 6 rpm), mPa.s : >15,000
  • pH-value : 2.5 to 3.0

    Further information can be found in technical data sheet
  • Assortment