TEROSON VR 5000 - 400ml (auxiliary adhesive for car body)/ Karosserie Kleber
No.
IDH.860240
TEROSON VR 5000 - 400ml (auxiliary adhesive for car body)/ Karosserie Kleber
Product description:
TEROSON VR 5000 is a solvent containing adhesive based on SBR with a very high degree of initial strength, which is applied from an aerosol can. It is used as a contact or as a pressure sensitive adhesive. The spray does not contain fluorochlorinated hydrocarbons or chlorinated hydrocarbons. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
Application of the adhesive and bonding
Shake the aerosol thoroughly before use. The bodywork adhesive spray is applied to the surfaces to be bonded directly from the aerosol, held at a distance of ca. 20 to 25 cm from the surface. The 6 way adjustable spray head enables both vertical and horizontal spraying of the adhesive. The parts coated with adhesive must be allowed an open time of ca. 10 minutes, depending on working methods employed, application thickness, temperature conditions, ventilation and humidity. (The so-called ”finger test” has proven itself a more reliable judgement of the open time than the time data. The adhesive must be dry but slightly tacky.) Taking exact care of the open time is important, for the bonding results can be effected by a too short as well as a too long waiting period. After the open time, parts should be positioned correctly together because a later adjustment is impossible. Finally the bonded parts are briefly, but strongly pressed together.
Cleaning
Adhesive residues/stains can be removed before curing - including application equipment and containers - with TEROSON VR 10.
Storage:
Frost sensitive : no Recommended storage temperature °C : 10 to 20 Shelf life : 12 months in original packaging
Parameters:
Color: light beige to colorless, transparent
Odour: own
Consistency: liquid, spray
Density at 20 °C: approx. 0,72 g/cm3
Consumption: approx. 150-250 g/m2 with adhesive applied on both sides
Resistance: resistant to water (at temperature 20° C),
Resistance: conditionally resistant to gas,
Resistance: not resistant to ester, ketone, aromatic compounds, chlorinated hydrocarbon.
The temperature of use : - 30°C do + 80°C
The temperature of use for a short time to 1 hour : 100°C
TEROSON VR 5000 is a solvent containing adhesive based on SBR with a very high degree of initial strength, which is applied from an aerosol can. It is used as a contact or as a pressure sensitive adhesive. The spray does not contain fluorochlorinated hydrocarbons or chlorinated hydrocarbons. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
Application of the adhesive and bonding
Shake the aerosol thoroughly before use. The bodywork adhesive spray is applied to the surfaces to be bonded directly from the aerosol, held at a distance of ca. 20 to 25 cm from the surface. The 6 way adjustable spray head enables both vertical and horizontal spraying of the adhesive. The parts coated with adhesive must be allowed an open time of ca. 10 minutes, depending on working methods employed, application thickness, temperature conditions, ventilation and humidity. (The so-called ”finger test” has proven itself a more reliable judgement of the open time than the time data. The adhesive must be dry but slightly tacky.) Taking exact care of the open time is important, for the bonding results can be effected by a too short as well as a too long waiting period. After the open time, parts should be positioned correctly together because a later adjustment is impossible. Finally the bonded parts are briefly, but strongly pressed together.
Cleaning
Adhesive residues/stains can be removed before curing - including application equipment and containers - with TEROSON VR 10.
Storage:
Frost sensitive : no Recommended storage temperature °C : 10 to 20 Shelf life : 12 months in original packaging
Parameters:
Color: light beige to colorless, transparent
Odour: own
Consistency: liquid, spray
Density at 20 °C: approx. 0,72 g/cm3
Consumption: approx. 150-250 g/m2 with adhesive applied on both sides
Resistance: resistant to water (at temperature 20° C),
Resistance: conditionally resistant to gas,
Resistance: not resistant to ester, ketone, aromatic compounds, chlorinated hydrocarbon.
The temperature of use : - 30°C do + 80°C
The temperature of use for a short time to 1 hour : 100°C
Full technical information can be found in the technical data sheet
