TEROSON 150 - 150ml (plastic primer) / Terokal 150
No.
IDH.267078
Associated products:
- TEROSON PU 9225 - 250ml (polyurethane adhesive)/Terokal 9225 (IDH.881837)
- TEROSON PU 9225 UF ME - 50ml (polyurethane adhesive for plastics, ultrafast) (IDH.1786434)
- TEROSON PU 9225 - 50ml (klej poliuretanowy)/Terokal 9225 (IDH.267081)
- TEROSON PU 9225 SF - 50ml (polyurethane adhesive for plastics, fast)/Terokal 9225 (IDH.882088)
TEROSON 150 - 150ml (plastic primer) / Terokal 150
Associated products:
- TEROSON PU 9225 - 250ml (polyurethane adhesive)/Terokal 9225 (IDH.881837)
- TEROSON PU 9225 UF ME - 50ml (polyurethane adhesive for plastics, ultrafast) (IDH.1786434)
- TEROSON PU 9225 - 50ml (klej poliuretanowy)/Terokal 9225 (IDH.267081)
- TEROSON PU 9225 SF - 50ml (polyurethane adhesive for plastics, fast)/Terokal 9225 (IDH.882088)
Product description:
Teroson 150 is a transparent, liquid, solvent-containing primer in a spray based on chlorinated polyolefins. It is used as an adhesion promoter when using Teroson 9225 for bonding plastics based on PP/EPDM, SMC, PC, PA, ABS and PUR. It is not suitable for soft PVC, pure PE and PP. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
The surfaces to be coated must be dry, free from oil, grease, wax, dirt, release agents and plastic care products. Pre-cleaning with a high pressure injection cleaner is absolutely necessary. After drying (oven, infrared) the parts are cleaned with Cleaner-FL. Finally the plastic parts are cleaned with Cleaner-FL (drying time minimum 5 minutes).Teroson-150 is applied from the spray can in a thin layer. Prior to application of Teroson 9225 a flash-off time of ca. 10 minutes has to be observed.
Storage:Frost-sensitive : no Recommended storage temp. : 15 °C do 25 °C Shelf-life: 12 months in original packing
Parameters:
Colour: transparent Odour: of xylene Consistency: thin liquid Density: approx. 0,72 g/cm³ Drying time: approx. 10 mins Application temperature: 15 °C to 30 °C
Full technical information can be found in the technical data sheet
Teroson 150 is a transparent, liquid, solvent-containing primer in a spray based on chlorinated polyolefins. It is used as an adhesion promoter when using Teroson 9225 for bonding plastics based on PP/EPDM, SMC, PC, PA, ABS and PUR. It is not suitable for soft PVC, pure PE and PP. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
The surfaces to be coated must be dry, free from oil, grease, wax, dirt, release agents and plastic care products. Pre-cleaning with a high pressure injection cleaner is absolutely necessary. After drying (oven, infrared) the parts are cleaned with Cleaner-FL. Finally the plastic parts are cleaned with Cleaner-FL (drying time minimum 5 minutes).Teroson-150 is applied from the spray can in a thin layer. Prior to application of Teroson 9225 a flash-off time of ca. 10 minutes has to be observed.
Storage:
Parameters:
Full technical information can be found in the technical data sheet