BONDERITE C-MC 1204 - 23kg (immersion cleaner, concentrate, former LOCTITE 7012)
No.
IDH.2551002
Product description:
LOCTITE SF 7012 is a multi purpose cleaner for cleaning soils, grease, oil and all kind of dirt. It can be used for cleaning of all substrates like metals, rubbers and painted surfaces. LOCTITE SF 7012 provides good foaming properties. The product is suitable for ultrasonic dip tanks high pressure spray and foam generation. Can be used in spray, brush or manual applications. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. LOCTITE SF 7012 is to be applied in dip, with a cloth or brushing equipment, by spraying or with a foam generator. Product concentration recommended for the various application methods:
● To be applied by dipping: 10 to 20%, at temperatures between 20 to 40 °C
● To be applied by using high pressure equipment: 1 to 2% on the nozzle
● To be applied by using foam generating machines: 20 to 50%
● To be applied by spraying: 20 to 30%
● To be applied by brush: 2 to 5%
● To be applied by manual using: 2 to 10%.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from ontainers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Density at 20 °C : 1.03 pH at 10 g/l : 11.3 Appearance : light yellow Viscosity : low
Full technical information can be found in the technical data sheet.
LOCTITE SF 7012 is a multi purpose cleaner for cleaning soils, grease, oil and all kind of dirt. It can be used for cleaning of all substrates like metals, rubbers and painted surfaces. LOCTITE SF 7012 provides good foaming properties. The product is suitable for ultrasonic dip tanks high pressure spray and foam generation. Can be used in spray, brush or manual applications. Further information about the product: biuro@woronko-kleje.pl
Steps to achieve the best adhesive results:
1. LOCTITE SF 7012 is to be applied in dip, with a cloth or brushing equipment, by spraying or with a foam generator. Product concentration recommended for the various application methods:
● To be applied by dipping: 10 to 20%, at temperatures between 20 to 40 °C
● To be applied by using high pressure equipment: 1 to 2% on the nozzle
● To be applied by using foam generating machines: 20 to 50%
● To be applied by spraying: 20 to 30%
● To be applied by brush: 2 to 5%
● To be applied by manual using: 2 to 10%.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from ontainers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the technical data sheet.