The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

TEROSON UP 130 - 321g (Body Filler)

TEROSON UP 130 - 321g (Body Filler) (IDH.2268398)

Product description:
TEROSON UP 130 is the original rock-hard multi-purpose repair paste with resistance to water, salt water, oil, fuel, and to most weak acids and chemicals. TEROSON UP 130 Chemical repairs:
● gasoline tanks
● radiators
● concrete
● housings and castings
● many more applications

APPLICATION AREAS
TEROSON UP 130 can be used on steel, aluminium, galvanized surfaces, glass fibre, copper and tin.

Directions for use:
Use the amount of Body Filler according to the required repair area and mix the mass in a ratio of a golf ball size (40mL) witha 4 to 5 cm (2 to 3 %) long hardener stripe of TEROSON UP 190, using a spreader until a uniform color has been achieved. After mixing the time to apply the filler is approximately 4.5 minutes at 20°C. Apply the filler mixture onto the repair area in a way that the dent, scratch or hole is sufficiently filled. Thicker layers should be built up using multiple layers.Surface can be sanded after 15 to 20 minutes at room temperature. Accelerated cure, using an infrared heater (surface temperature max. 60°C) is possible after 10 minutes of the Body Filler application. with a mixing stick and pallet, this product is suitable for the rapid assembly of small components or for fast and effective repair work. Further information about the product: biuro@woronko-kleje.pl

Storage:
  • Frost sensitive : no
  • Recommended storage temperature :10 to 25 °C
  • Shelf life : 24 months in original packaging

    Component A :
  • Colour : dark grey
  • Odour : styrene
  • Density : approx. 1.81 g/cm³

    Component B:
  • Colour : red
  • Odour : neutral
  • Density : approx. 1.1 g/cm³

    Mixture (Component A+B) :
  • Mixing ratio by volume 100: 2-3
  • Pot life (20 °C, 50% rh) : 4.5 min.
  • Grinding possible : after 15 to 20 min

    Full technical information can be found in the technical data sheet.
  • Assortment