LOCTITE LB 8105 - 400ml (mineral lubricant, up to 150 °C)
No.
IDH.1117830
Associated products:
Product description:
LOCTITE LB 8105 is a mineral oil based grease which is approved for use on equipment in food processing and pharmaceutical industries. This product is used as a lubricant for moving parts. It is ideally suited for bearings, cams, valves, and conveyors for food and pharmaceutical products. This product is typically used in applications with an operating range of -20 °C to +150 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Apply to clean parts which need lubricating, avoid excessive lubrication. If necessary you can use cleaner LOCTITE SF 7063
2. Do not apply to conveyors while food is being transported.
Storage:
Store product in the unopened container in a dry location.Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C orgreater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated duringuse. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product whichhas been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the technical data sheet.
LOCTITE LB 8105 is a mineral oil based grease which is approved for use on equipment in food processing and pharmaceutical industries. This product is used as a lubricant for moving parts. It is ideally suited for bearings, cams, valves, and conveyors for food and pharmaceutical products. This product is typically used in applications with an operating range of -20 °C to +150 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Apply to clean parts which need lubricating, avoid excessive lubrication. If necessary you can use cleaner LOCTITE SF 7063
2. Do not apply to conveyors while food is being transported.
Storage:
Store product in the unopened container in a dry location.Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C orgreater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated duringuse. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product whichhas been contaminated or stored under conditions other than those previously indicated.
Parameters:
- Density, ISO 2811-1 ( 25 °C ), g/ml : 0,9
- Consistency, ISO 6743-99, NLGI Class 2
- Peak Temperature, °C : 170
- Appearance : colorless
- Odor : odorless
Full technical information can be found in the technical data sheet.