LOCTITE 97152 (automatic, dual channel digital multifunction controller to actuate 1-2 dispensing valves and peripheral devices)
No.
IDH.1275665
Associated products:
- LOCTITE 97113 (stationary, precise dispense valve with suction function and 1/4" connection for low or medium viscosity products) (IDH.88644)
- LOCTITE 97114 (stationary, precise dispense valve with suction function and 3/8" connection for high viscosity products) (IDH.88645)
- LOCTITE EQ RC34 Automatic Reservoir DP (Automatic tank with analog low level sensor) (IDH.2830690)
- LOCTITE 98013 (Precise diaphragm valve with constant flow control, dedicated to dispensing low and medium viscosity adhesives) (IDH.318654)
- LOCTITE 97115 (electric rotorspray, used to apply products to the inner cylindrical surfaces of workpieces) (IDH.135557)
LOCTITE 97152 (automatic, dual channel digital multifunction controller to actuate 1-2 dispensing valves and peripheral devices)
Associated products:
- LOCTITE 97113 (stationary, precise dispense valve with suction function and 1/4" connection for low or medium viscosity products) (IDH.88644)
- LOCTITE 97114 (stationary, precise dispense valve with suction function and 3/8" connection for high viscosity products) (IDH.88645)
- LOCTITE EQ RC34 Automatic Reservoir DP (Automatic tank with analog low level sensor) (IDH.2830690)
- LOCTITE 98013 (Precise diaphragm valve with constant flow control, dedicated to dispensing low and medium viscosity adhesives) (IDH.318654)
- LOCTITE 97115 (electric rotorspray, used to apply products to the inner cylindrical surfaces of workpieces) (IDH.135557)
Product description:
A versatile multi-functional controller for actuating 1 - 2 dispensing valves as well as appropriate peripheral equipment such as reservoir, advancing slide, rotor spray, online flow monitor, etc. The process functions and data are laid out clearly on a graphic display. Settings can be made via the membrane keypad and the rotary selector switch. The amount of product dispensed is determined by the pressure in the reservoir, the length of time the dispensing valve remains open and the nozzle size. Reservoir pressure is controlled via precision pressure regulator and monitored electronically. The dispensing parameters can be PIN secured against manipulation. The controller can be integrated into fully automated assembly line operations using its PLC interface, relieving the higher-ranking control system from the time-critical and resource intensive tasks related to dispensing control and monitoring. It is possible to query data records via a serial PC interface for documentation, maintenance or quality assurance, etc. The system has an integrated pneumatic solenoid valve module for single channel operation. As an additional option, an external solenoid valve module 97204 may be connected to upgrade the unit for dual channel dispensing.
The controller can be used for evaluating data from either the pressure based or the calorimetric flow monitor. Error messages are shown on the display and, in the case of major faults, signalled with an audible alarm. In addition, fault and ready signals are provided as voltage-free electrical signals. Further information about the product: biuro@woronko-kleje.pl
Parameters:Power supply: 90-260 VAC Air input: 2-10 bar, filtered to max. 10 µm Air output: 0,1-7 bar Power consumption: 60 W Dimensions (W x H x D): 145 x 230 x 260 [mm] Weight: 3,9 kg
A versatile multi-functional controller for actuating 1 - 2 dispensing valves as well as appropriate peripheral equipment such as reservoir, advancing slide, rotor spray, online flow monitor, etc. The process functions and data are laid out clearly on a graphic display. Settings can be made via the membrane keypad and the rotary selector switch. The amount of product dispensed is determined by the pressure in the reservoir, the length of time the dispensing valve remains open and the nozzle size. Reservoir pressure is controlled via precision pressure regulator and monitored electronically. The dispensing parameters can be PIN secured against manipulation. The controller can be integrated into fully automated assembly line operations using its PLC interface, relieving the higher-ranking control system from the time-critical and resource intensive tasks related to dispensing control and monitoring. It is possible to query data records via a serial PC interface for documentation, maintenance or quality assurance, etc. The system has an integrated pneumatic solenoid valve module for single channel operation. As an additional option, an external solenoid valve module 97204 may be connected to upgrade the unit for dual channel dispensing.
The controller can be used for evaluating data from either the pressure based or the calorimetric flow monitor. Error messages are shown on the display and, in the case of major faults, signalled with an audible alarm. In addition, fault and ready signals are provided as voltage-free electrical signals. Further information about the product: biuro@woronko-kleje.pl
Parameters: