LOCTITE LB 8156 - 500g (anti-seize lubricant without metallic, up to 900 °C)
No.
IDH.1118299
Product description:
LOCTITE 8156 is designed as an anti-seize lubricant to protect surfaces exposed to high temperatures up to +900 °C. It can be used on surfaces subjected to high loads/low speeds at high temperatures. This product prevents seizing or jamming in joints exposed to high temperatures (e.g. exhausts of combustion engines and fittings or oil and gas burners). This product is typically used in applications with an operating range of -30 °C to +900 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Apply to clean parts which need lubricating, avoid excessive lubrication. For cleaning you can use LOCTITE SF 7063.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
Full technical information can be found in the technical data sheet.
LOCTITE 8156 is designed as an anti-seize lubricant to protect surfaces exposed to high temperatures up to +900 °C. It can be used on surfaces subjected to high loads/low speeds at high temperatures. This product prevents seizing or jamming in joints exposed to high temperatures (e.g. exhausts of combustion engines and fittings or oil and gas burners). This product is typically used in applications with an operating range of -30 °C to +900 °C. Further information about the product: biuro@woronko-kleje.pl
Directions for use:
1. Apply to clean parts which need lubricating, avoid excessive lubrication. For cleaning you can use LOCTITE SF 7063.
Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties.
Material removed from containers may be contaminated during use. Do not return product to the original container.
Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.
Parameters:
- Chemical composition: mineral and synthetic oils, inorganic gel and lithium soap
- Color : white
- Smell : weak
- Density at 20 ° C, g / ml: 1,3
- Drop point, °C : none
Full technical information can be found in the technical data sheet.