The website uses cookies to provide personalized services at the highest level, including statistical services and to adapt the content to individual preferences of users. Saving cookies can be turned off in your browser settings.
OK
[zamknij]     

LOCTITE SI 5926 BL - 100ml (silicone for sealing metal flanges, low strength, blue)

LOCTITE SI 5926 BL - 100ml (silicone for sealing metal flanges, low strength, blue) (IDH.2064457)

Product description:
LOCTITE® SI 5926™ cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. This product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Typical applications include use in valve covers, timing gear covers, differential covers, oil pans, transmission pans, water pumps and thermostat housings. This product is typically used in applications with an operating range of -54 °C to 204 °C. Further information about the product: biuro@woronko-kleje.pl

Directions for use:
1. For best performance bond surfaces should be clean and free from grease.
2. Moisture curing begins immediately after the product is exposed to the atmosphere, therefore parts to be assembled should be mated within a few minutes after the product is dispensed.
3. The bond should be allowed to cure (e.g. seven days), before subjecting to heavy service loads.
4. Excess material can be easily wiped away with non-polar solvents.

Storage:
Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling. Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated.

Parameters:
  • Specific Gravity at 25 °C : 1.04
  • Odor : acetic acid
  • Chemical Type : acetoxy silicone
  • Appearance (uncured) : blue paste
  • Components : One component - requires no mixing
  • Cure : room temperature vulcanizing (RTV)
  • Application : gasketing
  • Flexibility : enhances load bearing & shock absorbing characteristics of the bond area.

    Full technical information can be found in technical data sheet
  • Assortment