LOCTITE 97115 (electric rotorspray, used to apply products to the inner cylindrical surfaces of workpieces)
No.
IDH.135557
Associated products:
- LOCTITE 97113 (stationary, precise dispense valve with suction function and 1/4" connection for low or medium viscosity products) (IDH.88644)
- LOCTITE 97114 (stationary, precise dispense valve with suction function and 3/8" connection for high viscosity products) (IDH.88645)
- LOCTITE 97135, Diaphragm Valve, 2 mm Orifice (IDH.215846)
- LOCTITE 97118, Advancing slide (50 mm) (IDH.142636)
- LOCTITE 97152 (automatic, dual channel digital multifunction controller to actuate 1-2 dispensing valves and peripheral devices) (IDH.1275665)
- LOCTITE 98009 Light Cure Dispense Valve (IDH.218280)
Files to download:
LOCTITE 97115 (electric rotorspray, used to apply products to the inner cylindrical surfaces of workpieces)
Associated products:
- LOCTITE 97113 (stationary, precise dispense valve with suction function and 1/4" connection for low or medium viscosity products) (IDH.88644)
- LOCTITE 97114 (stationary, precise dispense valve with suction function and 3/8" connection for high viscosity products) (IDH.88645)
- LOCTITE 97135, Diaphragm Valve, 2 mm Orifice (IDH.215846)
- LOCTITE 97118, Advancing slide (50 mm) (IDH.142636)
- LOCTITE 97152 (automatic, dual channel digital multifunction controller to actuate 1-2 dispensing valves and peripheral devices) (IDH.1275665)
- LOCTITE 98009 Light Cure Dispense Valve (IDH.218280)
Product description:
With the Rotospray 97115, low medium viscosity LOCTITE products can be applied to the interior cylindrical surfaces of workpieces. The Rotospray is operated in combination with dispensing valves 98009, 97113 or 97135. LOCTITE controller 97152 is used for synchronized control of these units. The special design of drive assembly and rotor housing ensures that the rotorspray is sealed to prevent contamination with adhesive. Rotorspray 97115 is clamped in a fixture. The dispensing needle pointing toward the inside of the wetting holes on the rotor disc. LOCTITE controller 97152 is used for switching the rotorspray ON and OFF and for opening the dispensing valve after the rotor reaches the rated speed. As long as the dispensing valve is open, product is dispensed through the wetting holes of the rotor disc by centrifugal force and uniformly distributed onto the interior cylindrical surface of the part. The rotorspray drive assembly is a spring-loaded design to prevent damage by collision. Further information about the product: biuro@woronko-kleje.pl
Features:
Integrated error check, controlled speed and overload shut-off Status of rotorspray indicated by LED's High speed for large and small rotor discs Reduced risk of damage by collision due to spring-loaded design Shor cycle time due to quick-stop capability
Parameters:
Power supply: 24 [VDC] Power consumption: 10 W to 24 W for short periods Dimensions (W x H x D): ⌀ 35/40 x 305 x 70 [mm] Adjustable speed range: 4000-8000 [rpm] Weight: 600 [g]
With the Rotospray 97115, low medium viscosity LOCTITE products can be applied to the interior cylindrical surfaces of workpieces. The Rotospray is operated in combination with dispensing valves 98009, 97113 or 97135. LOCTITE controller 97152 is used for synchronized control of these units. The special design of drive assembly and rotor housing ensures that the rotorspray is sealed to prevent contamination with adhesive. Rotorspray 97115 is clamped in a fixture. The dispensing needle pointing toward the inside of the wetting holes on the rotor disc. LOCTITE controller 97152 is used for switching the rotorspray ON and OFF and for opening the dispensing valve after the rotor reaches the rated speed. As long as the dispensing valve is open, product is dispensed through the wetting holes of the rotor disc by centrifugal force and uniformly distributed onto the interior cylindrical surface of the part. The rotorspray drive assembly is a spring-loaded design to prevent damage by collision. Further information about the product: biuro@woronko-kleje.pl
Features:
Parameters: