LOCTITE 97002 (Catridge Pneumatic Dispenser 300ml)
No.
IDH.88632
Product description:
The LOCTITE 300 ml Catridge Applicator is a pneumatic dispenser for applying products from 300 ml catridges. Pneumatic pressurisation minimises operator fatigue. Flow rate is controlled via the integrated pressure regulator. The operator controls the amount dispensed by holding down the trigger. Further information about the product: biuro@woronko-kleje.pl
Typical Fluids Handled:LOCTITE structual acrylic adhesives, LOCTITE silicones/MS Polymers, LOCTITE anaerobic gasketing compouds, 1-component epoxy adhesives.
Features:
Integrated pressure regulator Quick pressure relief to minimise run-on effect Use with 300 ml catridges
Parameters:
Air input: max. 8,5 bar (125 psi) with 300 ml catridge, max. 1.5 bar (22 psi) with 250 ml tube, filtered to a maximum of 10 µm Air inlet port:
-Thread diameter : R 1/4
-Pressure Hose: Female thread min. 6 mm Weight: 800 g
The LOCTITE 300 ml Catridge Applicator is a pneumatic dispenser for applying products from 300 ml catridges. Pneumatic pressurisation minimises operator fatigue. Flow rate is controlled via the integrated pressure regulator. The operator controls the amount dispensed by holding down the trigger. Further information about the product: biuro@woronko-kleje.pl
Typical Fluids Handled:LOCTITE structual acrylic adhesives, LOCTITE silicones/MS Polymers, LOCTITE anaerobic gasketing compouds, 1-component epoxy adhesives.
Features:
Parameters:
-Thread diameter : R 1/4
-Pressure Hose: Female thread min. 6 mm